BannerGrip
BannerGrip® provides quick and cost effective signage for indoor and outdoor banners and posters. No edge preparation is required and with a special plastic locking insert, does not pierce the fabric. Simply attach to the top and bottom of the poster and simply tighten. Can be easily released by pulling on the loose edge of the fabric without any damage to the poster. Represents substantial cost savings where Posters or banners are required to be moved from one location to another.

The blades of the SignClip form a ‘wedge’ connection that is very strong. When the clips are under load the two blades bite together making a very robust, rigid fixing mechanism. Both clips have a semi circular groove in the blades which can be filled with silicon if the fixing needs to be permanent. Alternatively a small 5mm dia threaded rod can be inserted into the hole formed by the two grooves, this will lock the clips together. A punch can be used to knock the rod out when dismantling the sign.

When the installation is complete the sign will be spaced 8.5mm off the wall. The SignClip is ideal for mounting large items such as directories, display frames, light boxes, mirrors, pictures etc. It will have the effect in many cases of reducing an installation from a two man job to a one man job.